OEM ABS Wheel speed sensor WHT 003 856 WHT003856 VAG WHT003856 7H0927804 7H0 927 804 1KD 927 804 7H0 927 804 WHT 003 856 WHT 003 856 D

OEM Quality Aftermarket replacement part suit many VW Audi Skoda Porsche models.

Fitting Position includes below, depends on your vehicle year and model: Rear Axle Left, Rear Axle Right, Front Axle Left, Front Axle Right.

This sensor, part number WHT 003 856, is a high-quality replacement for the Anti-lock Braking System (ABS) on numerous Volkswagen Group (VAG) vehicles. It is essential for accurate wheel speed monitoring, ensuring correct operation of your ABS, ESP (Electronic Stability Program), and Traction Control Systems.

📋 Key Part Numbers & Cross-References

• Primary Part Number (OE): WHT 003 856 (May include revisions like 'C' or 'D')

• Alternative OE Numbers: 7H0 927 804

• Other Cross-References: 1KD 927 804

🛠️ Product Specifications

• Fitting Position: Primarily used on the Right Side of the vehicle (Front Axle Right or Rear Axle Right).

• Sensor Type: Active Sensor (Hall Effect)  

• Connector: 2-Pin Plug

• Compatibility: Fits a wide range of VAG vehicles built on platforms like PQ35 and MQB (e.g., Golf, Jetta, A3, Tiguan).

⚠️ Critical Fitment Guide: Position & Drive Type Explained

The biggest variable when replacing VAG ABS sensors is ensuring you have the correct part for the specific corner and the drive type of your vehicle (2WD/ FWD vs. 4WD/ AWD).

This specific part number, WHT 003 856, is generally designed for the RIGHT SIDE of the vehicle.

Look up the exact required sensor for all four corners, specifically noting if your vehicle is 2WD/ FWD or AWD/ 4MOTION/ Quattro
Verify the Old Part number: The most reliable method is to physically check the part number stamped on the old sensor after removing the electrical connector. Or use an OEM online parts catalog.

🏎️ Understanding the OEM ABS Wheel Speed Sensor (WHT 003 856)

The part number WHT 003 856 (also cross-referenced as WHT003856, 7H0927804, 1KD 927 804, etc.) is a standard OEM ABS Wheel Speed Sensor used across various Volkswagen, Audi, Skoda, and SEAT (VAG) models.

🛠️ Versatile Fitting Position

This specific sensor design is often non-directional or symmetrical. This means the exact same physical sensor can be used in all four corners of the vehicle:

• Front Axle Left (Passenger Side Front in RHD)

• Front Axle Right (Driver's Side Front in RHD)

• Rear Axle Left

• Rear Axle Right

💡 Why a Single Part Number Works for Multiple Positions

1. Symmetrical Design: The sensor body, mounting flange, and electrical connector are designed to fit the wheel hub assembly equally well on the left or right side of the vehicle, and often the front and rear as well, though cable lengths may vary on other part numbers.

2. Universal Function: The sensor's job is simply to read the speed from the magnetic tone ring (or reluctor wheel). The signal it generates is identical regardless of which corner it's mounted on. The ABS control module (ECU) then determines the specific corner based on which harness connector the signal comes through.