Quick Overview PDR Rods Hooks Hammer Dent Puller Set Glue Stricks PDR glue repair Car Dent Remove for Auto Bod
Anodized aluminum Tap down with 10pc POM Heads.
Designed with POM Head to prevent scratching of painted surfaces.
10 Shapes - Different shapes of head for different dents.
The top parts made by POM (polyformaldehyde) better than plastic
Bridge--Get professional-quality results and save hundreds of dollars in 3 easy steps
1.Apply the special glue to the super-strong dent puller, and place it firmly in the middle of the dent.
2. Fit the pulling bridge over the dent puller and attach the special wing nut.
3.Dial the dent away! Simply twist the wing nut and watch the dent disappear.
4.Remove the glue and gently polish with a soft cloth, leaving a beautiful, dent-free finish!
Packing List:
B2 - 2.69ft length, 3.15inch toe. B3 - 2.56ft length, 3.35inch toe.
B4 - 1.61ft length, 3.15inch toe. B5 - 1.7ft length, 2.56inch toe.
B6 - 1.9ft length, 3.35inch toe. B7 - 1.5ft length, 3.07inch toe
B8 - 1.15ft length, 1.96inch toe. B9 - 1.18ft length, 5.9inch toe.
B10 - 0.85ft length, 3.5inch toe. B11 - 1.44ft length, 2.95inch toe.
Packing include
16pcs PDR RODS (black and blue as per picture)
1pc Dent Lifter
1pc 40W Glue Gun
1pc Metal Tap down with 8 heads
5pcs Pro Glue Sticks
28pcs Pro Tabs
1pc Rubber Hammer
1pc Bridge Puller with 7 Pulling Tabs
1pc Tool bag (gift)
1pc Yellow shovel
1pc bottle
1pc blue clean cloth
Tips need to notice:
1. Find the dent by the line board ( through the refraction of light )and clean it with rag and alcohol.
2. Then clean the glue stick with alcohol to remove the grease on its surface. ( This allows the glue viscosity stronger.)
3. Insert the glue into the glue gun and connect the gun to the power supply , then heat it about 2-5 minutes until there is some hot glue spilling out from the gun.
4. Choose a tab whose shape is the most similar to the dent and pay attention to the hot glue which should begin from the centre of the tab , and with the circle action to smear it cover the tab, but should not overstep . ( The tab bigger the traction stronger , so if the dent is big , you should choose a big tab . )
5. You should quickly paste the tab to the dent and press it until the hot glue is firmed. ( It is the best time to use and the strongest viscosity the glue has when the hot glue will cool but still has a little remaining temperature , it needs about 0.2-5 minutes that you could feel it by hand.)
6. Fasten the Dent Lifter or T-shaped Repairer or Hammer or Bridge Puller and hold its two handles, up and down with power gradually , repeat your action until the dent is repaired or flatted , and don’t let the tab go off the car body. What’s more, you should pay attention to your power and not be rushed .
7. After repaired, spray the adhesive remover on the part where covers glue and remove it with a scraper .
Happy bidding and please check our other listings!